期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:沈强儒,杨少伟,赵一飞,曹慧.菱形立交分流区主线线形指标分析[J].哈尔滨工业大学学报,2015,47(9):90.DOI:10.11918/j.issn.0367-6234.2015.09.017
SHEN Qiangru,YANG Shaowei,ZHAO Yifei,CAO Hui.Analysis on mainline alignment index in diamond interchange diverging areas[J].Journal of Harbin Institute of Technology,2015,47(9):90.DOI:10.11918/j.issn.0367-6234.2015.09.017
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1336次   下载 803 本文二维码信息
码上扫一扫!
分享到: 微信 更多
菱形立交分流区主线线形指标分析
沈强儒1,2,杨少伟1,赵一飞1,曹慧1,2
(1.长安大学 公路学院,710064 西安;2.南通大学 建筑工程学院,226019 江苏 南通)
摘要:
为确定菱形互通式立交分流区域主线线形指标,分析了菱形互通式立交分流处的交通事故特征,运用汽车理论、交通心理学及人机工程学获取菱形立交分流区的识别视距,运用VB程序开发软件及高速公路横净距设置条件建立菱形立交区域主线平面及纵断面指标和识别视距关系模型,提出菱形立交分流区满足识别视距要求的主线圆曲线半径及凸形竖曲线半径值. 结果表明:对待建菱形立交分流区应分析识别视距,并用识别视距对主线线形指标验算;对已建成菱形立交分流区,应加强安全保障措施,保证主线及驶离主线车辆行车安全.
关键词:  高速公路  菱形立交  分流区  识别视距  线形
DOI:10.11918/j.issn.0367-6234.2015.09.017
分类号:U491
基金项目:南通大学自然基金(11Z037); 南通大学交通运输专项(11ZJ007).
Analysis on mainline alignment index in diamond interchange diverging areas
SHEN Qiangru1,2, YANG Shaowei1, ZHAO Yifei1, CAO Hui1,2
(1.School of Highway, Chang’an University, 710064 Xi’an, China; 2. School of Architecture Engineering, Nantong University, 226019 Nantong, Jiangsu, China)
Abstract:
The characteristics of traffic accidents is analysed in order to determine the mainline alignment index in the diamond interchange diverging areas. The recognition sight distance of the diamond interchange diverging areas by combining the automobile theory, traffic psychology and ergonomics,and simultaneously are acquired. Based on the VB software and the setting conditions of the lateral clear distance of the expressway, the relation model between the indicators of the mainline plane and vertical section and the recognition sight distance in the diamond interchange diverging areas is set up. The values of the circular curve radius and the convex vertical curve radius of the mainline which meets the requirements of the recognition sight distance in the diamond interchange diverging areas is obtained. The analysis results show that it is necessary to analysis to the recognition sight distance of the diamond interchange diverging areas to be constructed and check the alignment index of the mainline with the recognition sight distance, for the constructed diamond interchange diverging areas, it is necessary to strengthen the safety precautions so as to guarantee the traffic safety of vehicles driving on the mainline and off the mainline.
Key words:  expressway  diamond interchange  diverging areas  recognition sight distance  alignment

友情链接LINKS