期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:王震宇,王代玉,吕大刚.FRP约束混凝土圆柱应力-应变分析模型[J].哈尔滨工业大学学报,2010,42(2):200.DOI:10.11918/j.issn.0367-6234.2010.02.006
.Stress-strain analytical model for FRP-confined concrete circular column[J].Journal of Harbin Institute of Technology,2010,42(2):200.DOI:10.11918/j.issn.0367-6234.2010.02.006
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2048次   下载 929 本文二维码信息
码上扫一扫!
分享到: 微信 更多
FRP约束混凝土圆柱应力-应变分析模型
王震宇, 王代玉, 吕大刚
哈尔滨工业大学土木工程学院
摘要:
为精确模拟FRP约束混凝土的单轴受压性能,提出了FRP约束混凝土圆柱应力-应变分析模型的建立方法.在分析国内外大量试验数据基础上,依据八面体强度准则提出了FRP约束混凝土圆柱极限强度的计算方法,分析FRP约束混凝土圆柱极限应变与侧向约束强度的关系,建立了极限应变的计算方法;分析应力-应变全曲线试验结果中轴向应变与环向应变的关系,建立由轴向应变确定环向应变的计算公式;以Mander本构模型为主动约束关系,采用增量方法计算了FRP约束混凝土圆柱的应力-应变系曲线,模型预测结果与多数试验结果吻合较好.
关键词:  FRP  约束混凝土  圆柱  单轴受压  应力-应变关系  Mander模型
DOI:10.11918/j.issn.0367-6234.2010.02.006
分类号:TU398.9
基金项目:国家自然科学基金资助项目(50408010);地震行业科技专项基金资助项目(200808073)
Stress-strain analytical model for FRP-confined concrete circular column
WANG Zhen-yu,WANG Dai-yu,LU Da-gang (School of Civil Engineering,Harbin Institute of Technology,Harbin 150090,China
Abstract:
An analytical stress-strain model for concrete cylinders confined by fibre-reinforced polymer (FRP) was presented to accurately simulate the behavior of FRP-confined concrete under uniaxial compression.Based on large numbers of colleted test data,a new equation for predicting the ultimate compressive strength of FRPconfined concrete circular columns was suggested according to the octahedral theory,and an equation for calculating the ultimate compressive strain was also proposed by considering the lateral confining pressure.The full-range lateral-to-axial strain relationship for FRP-confined concrete circular columns was obtained by analyzing the stress-strain curves measured in tests.Then an analytical stress-strain model was generated via an incremental process,in which a stress-strain model for actively-confined concrete proposed by Mander was used as the basic model.It is found that the predicting results agree well with test data.
Key words:  FRP  confined concrete  circular column  uniaxial compression  stress-strain relationship  Mander model

友情链接LINKS