期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:江晟,曲昭伟,胡宏宇,李志慧.基于像素-角度映射的摄像机标定算法[J].哈尔滨工业大学学报,2012,44(8):130.DOI:10.11918/j.issn.0367-6234.2012.08.025
JIANG Sheng,QU Zhao-wei,HU Hong-yu,LI Zhi-hui.Camera calibration based on pixel-angel reflection model[J].Journal of Harbin Institute of Technology,2012,44(8):130.DOI:10.11918/j.issn.0367-6234.2012.08.025
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2150次   下载 1795 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于像素-角度映射的摄像机标定算法
江晟, 曲昭伟, 胡宏宇, 李志慧
吉林大学 交通学院,130022 长春
摘要:
为克服线性模型不能解释镜头畸变的缺点,以及常规标定中图像成像转换以及标定不能适应高度和角度改变等问题,在小孔线性成像模型的基础上,通过前期畸变标定和建立镜像坐标系,研究像素与角度的映射关系.利用三角函数将畸变系数和高度及角度参数引入到标定模型中,得到基于像素-角度映射的非线性模型.在多种标定环境下与Tsai等算法进行实验对比,验证了算法的准确性.在改变摄像机的角度和高度后,进一步验证了基于像素-角度映射的摄像机标定算法的系数不需要重新标定,仍具有良好的准确性和鲁棒性,可推广到工程应用领域.
关键词:  摄像机标定  像素-角度映射  镜像坐标系  非线性模型
DOI:10.11918/j.issn.0367-6234.2012.08.025
分类号:
基金项目:国家高技术研究发展计划项目(2009AA11Z210); 国家自然科学基金项目(50808092); 吉林省科技发展计划项目.
Camera calibration based on pixel-angel reflection model
JIANG Sheng, QU Zhao-wei, HU Hong-yu, LI Zhi-hui
College of Transportation, Jilin University,130022 Changchun,China
Abstract:
According to the fact that the linear imaging model cannot explain the lens distortion,and to overcome the problem that the ordinary calibration methods are not suit for the change of height and angle, based on the pin-hole model and the previous distortion correction, this paper builds up a mirror coordinates system to study the reflection relation of pixel and angle. By using trigonometric functions and distortion coefficient,the height parameter and angle parameter are introduced into the model,and then the non-linear model is obtained. Finally, under different kinds of situation, comparing with Tsai’s method, the algorithm validity is verified. After changing the camera angle and height, the algorithm, which does not require re-calibration, is still with good accuracy and robustness. Thus, the algorithm can be applied to the engineering field.
Key words:  camera calibration  pixel-angle reflection  mirror coordinates system  non-linear model

友情链接LINKS