期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:徐海宾,邓宗才.UHPC梁开裂弯矩和裂缝试验[J].哈尔滨工业大学学报,2014,46(4):87.DOI:10.11918/j.issn.0367-6234.2014.04.015
XU Haibin,DENG Zongcai.Cracking moment and crack width of ultra-high performance concrete beams[J].Journal of Harbin Institute of Technology,2014,46(4):87.DOI:10.11918/j.issn.0367-6234.2014.04.015
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2001次   下载 1492 本文二维码信息
码上扫一扫!
分享到: 微信 更多
UHPC梁开裂弯矩和裂缝试验
徐海宾1,2, 邓宗才1
(1. 北京工业大学 工程抗震与结构诊治北京市重点实验室,100124 北京; 2.河南理工大学 土木工程学院,454003 河南 焦作)
摘要:
为研究超高性能混凝土梁的开裂弯矩和裂缝特征及评估现有规范公式计算超高性能混凝土梁开裂弯矩和裂缝宽度的适用性,进行了8根超高性能混凝土T形简支梁的受弯性能试验,观察试验梁的开裂弯矩和裂缝发展.试验结果表明:预应力水平对开裂荷载影响较大;超高性能混凝土梁的弯曲裂缝细而密,加载初期最大裂缝宽度发展较慢,纵筋屈服后最大裂缝宽度发展明显加快;利用现有规范公式计算超高性能混凝土梁开裂弯矩和最大裂缝宽度过于保守.在现行规范公式的基础上引入抗裂影响系数和裂缝修正系数,给出了超高性能混凝土梁开裂弯矩和最大裂缝宽度的建议公式,建议公式的计算值和试验值吻合良好.
关键词:  超高性能混凝土  开裂弯矩  受弯性能  裂缝宽度  预应力
DOI:10.11918/j.issn.0367-6234.2014.04.015
分类号:TU375.1
基金项目:国家自然科学基金资助项目(50978006);教育部博士点基金资助项目(20131103110017).
Cracking moment and crack width of ultra-high performance concrete beams
XU Haibin1,2, DENG Zongcai1
(1. Beijing Key Lab of Earthquake Engineering and Structural Retrofit, Beijing University of Technology,100124 Beijing,China;2.School of Civil Engineering, Henan Polytechnic University, 454003 Jiaozuo,Henan,China)
Abstract:
Eight ultra-high performance concrete T-beams subjected to bending were tested to investigate their cracking moments and cracking characteristics and evaluate the formulas for cracking moment and crack width specified in existing design codes. The test results show that the degree of prestress has a great impact on the cracking moment; the bending cracks are dense and fine, the development of the maximum crack width is slow at the early stage of loading and speeds up remarkably when the reinforcements reach to yield strength. Predicating the cracking moment and maximum crack width by existing code formulas will lead to overly conservative results. The modified formulas of cracking moment and crack width are suggested for ultra-high performance concrete beams by introducing the anti-cracking effect coefficient and crack-correction coefficient respectively, and the calculated values by the suggested formulas agree well with the test results.
Key words:  ultra-high performance concrete  cracking moment  flexural behavior  crack width  prestress

友情链接LINKS