期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:王怀亮,宋玉普.多轴应力状态下混凝土的动态强度准则[J].哈尔滨工业大学学报,2014,46(4):93.DOI:10.11918/j.issn.0367-6234.2014.04.016
WANG Huailiang,SONG Yupu.A dynamic strength criterion of concrete under multiaxial stress state[J].Journal of Harbin Institute of Technology,2014,46(4):93.DOI:10.11918/j.issn.0367-6234.2014.04.016
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1847次   下载 2190 本文二维码信息
码上扫一扫!
分享到: 微信 更多
多轴应力状态下混凝土的动态强度准则
王怀亮1,2, 宋玉普3
(1. 大连大学 建筑工程学院,116622 辽宁 大连; 2. 武汉大学 水资源与水电工程科学国家重点实验室, 430072 武汉; 3. 大连理工大学 海岸和近海工程国家重点实验室, 116024 辽宁 大连)
摘要:
为了解复杂应力状态下混凝土动态强度变化规律,提出了一个考虑应变率效应的八面体应力空间的多轴静动破坏准则.该准则的空间破坏包络曲面采用二次函数形式,在偏平面上的破坏包络线采用Willam-Warnke 模型在偏平面上的椭圆曲线,使用特征应力点法对拉压子午线方程进行修正以考虑偏平面上罗德角对动态强度的影响.通过对大量混凝土多轴静动强度试验成果的分析,表明此强度准则与已有的试验结果吻合较好,能很好地反映平面应力或三轴应力状态下普通混凝土的静动强度变化规律,并且形式简单,便于实际应用.
关键词:  混凝土  应变率  罗德角  强度准则  特征应力点
DOI:10.11918/j.issn.0367-6234.2014.04.016
分类号:TU375
基金项目:国家自然科学基金资助项目(50908026);武汉大学水资源与水电工程科学国家重点实验室开放基金(2012B102);河海大学水文水资源与水利工程科学国家重点实验室开放基金(2013491811).
A dynamic strength criterion of concrete under multiaxial stress state
WANG Huailiang1,2, SONG Yupu3
(1. Civil and Architectural Engineering College, Dalian University, 116622 Dalian, Liangning,China; 2. State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, 430072 Wuhan, China; 3. State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, 116024 Dalian,Liaoning, China)
Abstract:
In order to understand the dynamic strength properties of the concrete under complex stress state, a united multiaxial static-dynamic strength criterion is established in the octahedral stress space in which the strain rate effect is considered. The failure surface of the proposed model in three-dimensional (3D) stresses space is represented by a quadratic function. The strength envelope in the deviatoric plane is described by an elliptic curve similar to that of Willam-Warnke model, and the tensile and compressive meridians are calibrated using typical stress points method to consider the effect of the Lode angle on the dynamic strength. By the analysis of multiaxial static and dynamic strength test data of concrete, it is proved that the predicted strength of the failure criterion is in good agreement with the experimental data. Meanwhile, the strength criterion has simple expression form and is convenient for practical application.
Key words:  concrete  strain rate  Lode angle  strength criterion  typical stress points

友情链接LINKS