期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:吴迪,张军,左薇,刘惠玲.微波热解污泥影响因素及固体残留物成分分析[J].哈尔滨工业大学学报,2015,47(8):43.DOI:10.11918/j.issn.0367-6234.2015.08.009
WU Di,ZHANG Jun,ZUO Wei,LIU Huiling.Influencing factors of sewage sludge pyrolysis by microwave and sewage sludge pyrolysis residues analysis[J].Journal of Harbin Institute of Technology,2015,47(8):43.DOI:10.11918/j.issn.0367-6234.2015.08.009
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2120次   下载 1291 本文二维码信息
码上扫一扫!
分享到: 微信 更多
微波热解污泥影响因素及固体残留物成分分析
吴迪,张军,左薇,刘惠玲
(哈尔滨工业大学 市政环境工程学院, 150090哈尔滨)
摘要:
为探究不同热解条件下污泥微波热解的特性,考察了微波功率、污泥含水率以及吸波物质添加量对污泥热解过程及固体残留物的影响,利用响应曲面法优化了污泥微波热解的条件并分析了污泥热解固体残留物的成分.结果表明:当微波功率为1 880 W、污泥含水率为79.7%、吸波物质添加量为0.48 g时,响应曲面法预测最高污泥热解效率为77.4%,实际测得污泥的热解效率为77.5%.污泥热解固体残留物中灰分和固定碳比例较大,主要无机成分为SiO2、Al2O3、Fe2O3、CaO等氧化物,适宜进一步材料化利用.
关键词:  微波  热解  污泥  响应曲面法  污泥热解固体残留物
DOI:10.11918/j.issn.0367-6234.2015.08.009
分类号:X705
基金项目:国家高技术研究发展计划(863计划)重点项目(2009AA064704).
Influencing factors of sewage sludge pyrolysis by microwave and sewage sludge pyrolysis residues analysis
WU Di, ZHANG Jun, ZUO Wei, LIU Huiling
(School of Municipal and Environmental Engineering, Harbin Institute of Technology, 150090 Harbin, China)
Abstract:
In order to investigate the microwave pyrolysis characteristics of sewage sludge under different pyrolysis conditions, effect of microwave power, sewage sludge moisture content and microwave absorbing material content on the sewage sludge pyrolysis process and the pyrolysis residues was investigated. The microwave pyrolysis conditions of sewage sludge were optimized using response surface methodology and the components of pyrolysis residue were analyzed. The predicted highest pyrolysis efficiency of sewage sludge obtained from the response surface methodology was 77.4% when microwave power was 1 880 W, sludge moisture content was 79.7% and microwave absorbing materials content was 0.48 g. For comparison, the actual measurement one was 77.5%.Ash and fixed carbon accounted for a large proportion of the pyrolysis residues and the major inorganic components were SiO2, Al2O3, Fe2O3 and CaO, etc.
Key words:  microwave  pyrolysis  sewage sludge  response surface methodology  sewage sludge pyrolysis residues

友情链接LINKS