期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:孔令云,李金桥,张玉贞,余苗.矿粉表面能与其所含化学成分表面能关系模型[J].哈尔滨工业大学学报,2018,50(9):101.DOI:10.11918/j.issn.0367-6234.201706081
KONG Lingyun,LI Jinqiao,ZHANG Yuzhen,YU Miao.Relationship model of surface energy between mineral filler and its chemical compositions[J].Journal of Harbin Institute of Technology,2018,50(9):101.DOI:10.11918/j.issn.0367-6234.201706081
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1292次   下载 849 本文二维码信息
码上扫一扫!
分享到: 微信 更多
矿粉表面能与其所含化学成分表面能关系模型
孔令云1,李金桥1,张玉贞2,余苗1
(1.交通土建工程材料国家地方联合工程试验室(重庆交通大学),重庆 40074; [KH-*1]2.中国石油大学(华东) 化学工程学院,山东 青岛 266555 )
摘要:
为探究矿粉表面能与其组成化学成分间的内在关系,通过灰色关联法与主成分分析法,以矿粉的化学成分质量分数为媒介,对采用毛细管上升法测得的5种矿粉、5种化学成分表面能之间的关系模型进行量化分析.结果表明:矿粉的表面能实测值与通过其化学成分表面能计算的计算值之间存在良好的关联度;提出了变化的矿粉表面能、化学成分质量分数与不变的化学成分表面能之间定量关系模型,通过该模型可对不同岩石加工的矿粉,在测得其化学成分质量分数后,直接计算得到矿粉的表面能,可为矿粉表面能在道路工程中应用的深入研究提供理论指导.
关键词:  沥青路面  关系模型  主成分分析法  矿粉  化学成分  表面能
DOI:10.11918/j.issn.0367-6234.201706081
分类号:U416.217
文献标识码:A
基金项目:国家自然科学基金(51508062); 重庆市教委科学技术研究项目(KJ1500508)
Relationship model of surface energy between mineral filler and its chemical compositions
KONG Lingyun1,LI Jinqiao1,ZHANG Yuzhen2,YU Miao1
(1.National & Local Joint Engineering Laboratory of Traffic Civil Engineering Materials (Chongqing Jiaotong University), Chongqing 400074, China; 2. College of Chemical Engineering, China University of Petroleum, Qingdao 266555,Shandong,China)
Abstract:
To investigate the relationship of surface energy between mineral filler and its chemical compositions, the grey correlation method and principal component analysis method were employed to quantitatively analyze the relationship model measured by capillary rise method. Results showed that measured surface energy parameters of mineral filler agreed with the value calculated on the basis of chemical composition surface energy parameters. A quantitative model related to the changing mineral filler surface energy parameter, chemical composition content and the unchanging chemical composition surface energy parameter was proposed. The surface energy of mineral filler can be determined by this model when the chemical compositions are given. All of the results can provide theoretical direction to further study on mineral filler surface energy for road engineering.
Key words:  asphalt pavement  relationship model  principal component analysis method  mineral filler  chemical composition  surface energy

友情链接LINKS