期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:石志勇,李倩倩,王旭东,周兴业.交通量非均匀分布的沥青路面疲劳等效温度[J].哈尔滨工业大学学报,2021,53(3):158.DOI:10.11918/202001037
SHI Zhiyong,LI Qianqian,WANG Xudong,ZHOU Xingye.Fatigue equivalent temperature of asphalt pavement with nonuniform traffic volume distribution[J].Journal of Harbin Institute of Technology,2021,53(3):158.DOI:10.11918/202001037
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 941次   下载 806 本文二维码信息
码上扫一扫!
分享到: 微信 更多
交通量非均匀分布的沥青路面疲劳等效温度
石志勇1,李倩倩1,王旭东2,3,周兴业2,3
(1.重庆交通大学 材料科学与工程学院,重庆 400074;2.交通运输部公路科学研究院,北京 100088; 3.哈尔滨工业大学 交通科学与工程学院,哈尔滨 150090)
摘要:
针对现有沥青路面疲劳等效温度理论未考虑交通量非均匀分布和沥青路面温度取值不合理等问题,为更加准确科学地计算等效温度,提出沥青层当量温度和深度概念并推导其计算方法,建立大气日当量温度与沥青层当量温度的关系,采用沥青层当量深度处的当量温度作为沥青层代表温度并划分温度区间,开展沥青混合料动态模量和疲劳试验,统计各个温度区间内的交通量分布频率,基于Miner线性累积原理提出一种考虑交通量非均匀分布的沥青路面疲劳等效温度计算方法,计算两种交通量分布方式的等效温度值,最后与其他方法进行对比分析.结果表明:沥青层当量温度可作为沥青层代表温度来划分温度区间;考虑交通量非均匀分布的沥青路面疲劳等效温度计算方法在理论上改进了现有方法的不足,使等效温度的计算更加科学和可靠,两种交通量分布方式的等效温度实际计算结果相差1.6 ℃,与其他方法相比具有一定的优越性,后期应当加强观测,进一步完善计算方法的精确性.
关键词:  沥青层疲劳  交通量分布  Miner原理  等效温度  计算方法
DOI:10.11918/202001037
分类号:U416.217
文献标识码:A
基金项目:国家重点研发计划(2017YFC0840201)
Fatigue equivalent temperature of asphalt pavement with nonuniform traffic volume distribution
SHI Zhiyong1,LI Qianqian1,WANG Xudong2,3,ZHOU Xingye2,3
(1.School of Materials Science and Engineering, Chongqing Jiaotong University, Chongqing 400074, China; 2. Research Institute of Highway Ministry of Transport, Beijing 100088, China; 3. School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China)
Abstract:
The existing theory on fatigue equivalent temperature of asphalt pavement does not take account of the nonuniform traffic volume distribution and the values of asphalt pavement temperature are unreasonable. To calculate the equivalent temperature in a more accurate and scientific way, the concepts of equivalent temperature and depth of asphalt layer were proposed and corresponding calculation methods were deduced. The relationship between the daily equivalent temperature of atmosphere and the equivalent temperature of asphalt layer was established. Taking the equivalent temperature at the equivalent depth of the asphalt layer as the representative temperature and dividing the temperature into different ranges, the dynamic modulus and fatigue tests on asphalt mixtures were carried out, and the frequency of traffic volume distribution in different temperature ranges was classified. Based on the Miner linear cumulative principle, a method was proposed for calculating fatigue equivalent temperature of asphalt pavement that takes the nonuniform distribution of traffic volume into consideration. The equivalent temperature values of two traffic volume distribution modes were calculated and comparative analysis was carried out. Results show that the equivalent temperature of asphalt layer could be used as representative temperature to divide temperature ranges. The proposed calculation method for the fatigue equivalent temperature of asphalt pavement could overcome the shortcomings of the existing methods theoretically by taking the nonuniform distribution of traffic volume into consideration, which makes the calculation of equivalent temperature more scientific and reliable. The calculated temperature of two traffic volume distributions had a difference of 1.6 °C. Compared with other methods, the proposed method had certain advantages. To further improve the accuracy of the calculation method, more intensified observation should be made in the future.
Key words:  fatigue of asphalt layer  traffic volume distribution  Miner principle  equivalent temperature  calculation method

友情链接LINKS