期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:项贻强,何晓阳.考虑非均匀收缩徐变的PC箱梁桥时变性能[J].哈尔滨工业大学学报,2015,47(12):117.DOI:10.11918/j.issn.0367-6234.2015.12.021
XIANG Yiqiang,HE Xiaoyang.Time-dependent behavior of PC box girder bridges considering non-uniform shrinkage and creep[J].Journal of Harbin Institute of Technology,2015,47(12):117.DOI:10.11918/j.issn.0367-6234.2015.12.021
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2297次   下载 1738 本文二维码信息
码上扫一扫!
分享到: 微信 更多
考虑非均匀收缩徐变的PC箱梁桥时变性能
项贻强,何晓阳
(浙江大学 土木工程系,310058 杭州)
摘要:
为研究箱梁顶板、底板及腹板厚度差异引起的非均匀收缩徐变效应,分析了某三跨预应力混凝土(PC)连续箱梁桥时变性能.考虑混凝土抗压强度、弹性模量的时变性,分别建立模拟实际悬臂施工顺序的实体单元及梁单元有限元模型,比较成桥后在均匀及非均匀收缩徐变下的结构变形、混凝土应力和钢束应力.同时将长期挠度、钢束应力与相应规范值进行对比,并估算了车辆荷载及非均匀收缩徐变导致跨中底板出现拉应力和裂缝的时间.结果表明,与均匀收缩徐变相比,非均匀收缩徐变对跨中长期下挠影响较小,而对混凝土应力影响较大,在箱梁设计中应予以考虑.
关键词:  桥梁工程  箱梁桥  悬臂施工  非均匀收缩徐变  长期下挠  混凝土应力
DOI:10.11918/j.issn.0367-6234.2015.12.021
分类号:U448
基金项目:国家自然科学基金(51178416).
Time-dependent behavior of PC box girder bridges considering non-uniform shrinkage and creep
XIANG Yiqiang, HE Xiaoyang
(Department of Civil Engineering, Zhejiang University, 310058 Hangzhou, China)
Abstract:
The time-dependent behavior of a typical three-span prestressed concrete (PC) continuous box girder bridge was analyzed to investigate the effect of non-uniform shrinkage and creep due to thickness differences among webs and top and bottom flanges in box girders. Considering time-varying effects of compressive strength and elasticity modulus of concrete, finite element models which simulated cantilever-construction by solid and beam elements were developed, respectively. A comparative study on structural displacement, concrete stress and tendon stress caused by uniform and non-uniform creep and shrinkage after bridge completion was peformed. Meanwhile, long-term deflection and tendon stress were compared with relevant values which were calculated according to the standard. And the time when tensile stress and crack resulting from vehicle load and non-uniform creep and shrinkage in the bottom flange appeared was estimated. The results show that compared with uniform creep and shrinkage, non-uniform creep and shrinkage have smaller influence on the long-term deflection at midspan, and have greater effect on the concrete stress, which should be concerned in design of box girders.
Key words:  bridge engineering  box girder bridge  cantilever construction  non-uniform shrinkage and creep  long-term deflection  concrete stress

友情链接LINKS