| 引用本文: | 李飘庭,荆奇,张勇斌,李建,傅波.电极丝前置式射流电解加工仿真及初步实验研究[J].哈尔滨工业大学学报,2020,52(1):178.DOI:10.11918/201903196 |
| LI Piaoting,JING Qi,ZHANG Yongbin,LI Jian,FU Bo.Simulation and preliminary experimental study on wire-preposed electrochemical jet machining[J].Journal of Harbin Institute of Technology,2020,52(1):178.DOI:10.11918/201903196 |
|
| 本文已被：浏览 1205次 下载 857次 |
码上扫一扫！ |
|
|
| 电极丝前置式射流电解加工仿真及初步实验研究 |
|
李飘庭1,2,荆奇1,3,张勇斌1,李建1,傅波2
|
|
(1.中国工程物理研究院 机械制造工艺研究所,四川 绵阳 621900; 2.四川大学 机械工程学院,成都 610065;3.复旦大学 光科学与工程系,上海 200438)
|
|
| 摘要: |
| 射流电解加工技术在航天、仪器、电子和医疗设备等领域有着非常重要的意义,为改善传统射流电解加工,提高加工质量,文中提出了一种电极丝前置式射流电解加工技术. 该技术在传统射流电解基础上,将柔性电极丝前置伸出喷嘴,且利用高速射流液束将电极丝约束在其中,使电场相对于蚀除区域更集中,以期提高射流电解的定域性. 针对该技术的加工原理,利用COMSOL软件对加工过程的多物理场分布进行了仿真分析,搭建了实验平台并通过工艺实验验证其可行性. 研究结果表明:在相同条件下,相比于传统射流电解加工,电极丝前置式射流电解加工提高了加工效率,增大了凹坑的深径比,凹坑的内表面质量也有显著提高. |
| 关键词: 射流电解加工 微细加工 电极丝 仿真 加工质量 |
| DOI：10.11918/201903196 |
| 分类号:V261.5 |
| 文献标识码:A |
| 基金项目:四川省科技计划项目(NO.2018JY0620)；国防基础科研计划项目(JCKY2018212C015) |
|
| Simulation and preliminary experimental study on wire-preposed electrochemical jet machining |
|
LI Piaoting1,2,JING Qi1,3,ZHANG Yongbin1,LI Jian1,FU Bo2
|
|
(1. Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics,Mianyang 621900, Sichuan,China; 2.School of Mechanical Engineering, Sichuan University, Chengdu 610065, China; 3.Department of Optics Science and Engineering,Fudan University, Shanghai 200438, China)
|
| Abstract: |
| In order to perfect traditional electrochemical jet machining and improve the machining quality, a wire-preposed electrochemical jet machining(WPEJM) technology is proposed, in which a flexible electrode wire is fixed in the high-speed jet to concentrate the electric field and improve the localization of jet electrolysis. According to the processing principle of this technology, software COMSOL is used to conduct simulation analysis on the distribution of multiple physical fields in machining process, and an experimental platform is set up to verify its feasibility. The preliminary results show that under the same condition, compared with the traditional electrochemical jet machining, the proposed method increases the machining efficiency and the depth-diameter ratio of the pit. Furthermore, the inner surface quality of the pit is significantly improved. |
| Key words: electrochemical jet machining micro machining electrode simulation machining quality |
