期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:任秉银,汤欣宁,马云辉.电动汽车无线充电金属异物检测线圈电磁特性[J].哈尔滨工业大学学报,2020,52(7):35.DOI:10.11918/202003115
REN Bingyin,TANG Xinning,MA Yunhui.Electromagnetic characteristics of metal foreign object detection coil in wireless charging system of electric vehicle[J].Journal of Harbin Institute of Technology,2020,52(7):35.DOI:10.11918/202003115
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1250次   下载 1182 本文二维码信息
码上扫一扫!
分享到: 微信 更多
电动汽车无线充电金属异物检测线圈电磁特性
任秉银,汤欣宁,马云辉
(哈尔滨工业大学 机电工程学院,哈尔滨 150001)
摘要:
在电动汽车无线充电系统中,为实现较大范围内对小型金属异物的有效检测,提出一种金属异物检测线圈电磁特性的分析方法. 基于谐振电路在受到金属异物干扰后会产生失谐现象,论述金属异物检测的基本原理;分析检测线圈电磁特性的主要影响因素,给出将若干个PCB(Printed Circuit Board)型小线圈通过串并联构成线圈组的线圈设计方案;用Maxwell软件仿真分析金属异物进入检测线圈上方对线圈磁场的影响,得到不同的线圈结构参数和线圈连接方式对检测线圈电磁特性的影响规律;在无线充电环境下,用检测线圈组的感应特性仿真实例验证所提出的检测线圈组设计方案的可行性. 结果表明:本文提出的设计方案能够有效抑制电动汽车无线充电过程中环境磁场引起检测线圈的感应电压噪声,金属异物检测线圈电磁特性的分析方法能够为电动汽车无线充电系统中金属异物检测线圈的设计提供指导.
关键词:  电动汽车  无线充电  金属异物检测  检测线圈  电磁特性  线圈设计方案
DOI:10.11918/202003115
分类号:TM155
文献标识码:A
基金项目:
Electromagnetic characteristics of metal foreign object detection coil in wireless charging system of electric vehicle
REN Bingyin,TANG Xinning,MA Yunhui
(School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China)
Abstract:
Aiming at improving the effectiveness for detecting the small pieces of metal foreign object detection (MFOD) scattered in large area of wireless charging system (WCS) of Electric Vehicle (EV), a method for analyzing the electromagnetic characteristics of MFOD coil is presented. The principle of MFOD based on the mistuned appearance of resonant circuits disturbed by metal foreign object (MFO) is introduced. The main factors of affecting the electromagnetic characteristics of MFOD coil are analyzed, and the general design scheme for MFOD coil is proposed as combination of several printed circuit board(PCB) type small coils by series-parallel connection. By the Maxwell simulation, the influences of MFO entering above the MFOD coil on the magnetic field of MFOD coil are analyzed, and the influences of parameters and structural type of MFOD coil on electromagnetic characteristics of MFOD coil are obtained. The simulation result verifies that the presented design scheme for MFOD coil can restrain the induced electric noise under the condition of WCS of EV. The method can be used to guide the design of MFOD coil in WCS of EV.
Key words:  electric vehicle  wireless charging  metal foreign object detection  detection coil  electromagnetic characteristics  design scheme for detection coil

友情链接LINKS