期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:宗群,杨希成,张秀云,刘文静.一种故障干扰解耦的航天器主动容错控制方法[J].哈尔滨工业大学学报,2020,52(9):107.DOI:10.11918/201909065
ZONG Qun,YANG Xicheng,ZHANG Xiuyun,LIU Wenjing.An active fault tolerant control method for spacecraft with fault and disturbance decoupling[J].Journal of Harbin Institute of Technology,2020,52(9):107.DOI:10.11918/201909065
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 999次   下载 861 本文二维码信息
码上扫一扫!
分享到: 微信 更多
一种故障干扰解耦的航天器主动容错控制方法
宗群1,杨希成1,张秀云1,刘文静2
(1.天津大学 电气自动化与信息工程学院, 天津 300072; 2.空间智能控制技术重点实验室(北京控制工程研究所), 北京100190)
摘要:
为提高航天器系统的可靠性,研究一种干扰影响下的航天器主动容错控制技术. 首先,为实现干扰下的故障诊断,减小航天器系统故障检测到故障估计之间的时间延迟,通过将故障扩展为系统状态量,设计未知输入观测器,进行航天器故障检测及估计单元一体化设计. 其次,考虑到此方法无法实现对干扰的估计,且仅能解决可导的故障类型,进一步设计新型的自适应滑模未知输入观测器,能够保证对干扰及故障的同时解耦估计,也可以解决更广泛的故障类型. 最后,考虑观测器观测过程中的估计误差,设计了多变量终端滑模容错控制器,提高了控制性能. 仿真结果表明:所设计的主动容错控制策略能够实现干扰影响下的故障诊断,可以保证航天器控制性能的快速恢复.
关键词:  航天器  故障诊断  故障估计  观测器设计  容错控制
DOI:10.11918/201909065
分类号:TP273
文献标识码:A
基金项目:国家自然科学基金(0,0); 教育部联合科学基金(6141A0202304)
An active fault tolerant control method for spacecraft with fault and disturbance decoupling
ZONG Qun1,YANG Xicheng1,ZHANG Xiuyun1,LIU Wenjing2
(1. School of Electrical Automation and Information Engineering, Tianjin University, Tianjin 300072, China; 2. Science and Technology on Space Intelligent Control Laboratory (Beijing Institute of Control Engineering), Beijing 100190, China)
Abstract:
To improve the reliability of spacecraft system, an active fault tolerant control technique for spacecraft under the influence of disturbance was studied. First, in order to realize fault diagnosis under disturbance and reduce the time delay from fault detection to fault estimation, the concerned faults were extended to state vectors, and an unknown input observer was proposed for the integrated design of fault detection and fault estimation unit. Then, considering that the method needs to be further processed for interference estimation and can only solve the differentiable fault type, a novel adaptive sliding mode unknown input observer was designed, which can ensure the estimation of fault and disturbance decoupling at the same time and deal with a wider range of fault types. Finally, in view of the estimation error of the observer, a multivariable terminal sliding mode fault tolerant controller was proposed to improve its control performance. Simulation results show that the active fault tolerant control technique could realize fault diagnosis under the influence of disturbance and ensure the rapid recovery of control performance.
Key words:  spacecraft  fault diagnosis  fault estimation  observer design  fault tolerant control

友情链接LINKS