期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:殷青,王春兴,韩昀松.基于多视角图像的建筑环境信息建模方法[J].哈尔滨工业大学学报,2021,53(2):104.DOI:10.11918/202001057
YIN Qing,WANG Chunxing,HAN Yunsong.Building environment information modeling based on multi-view image[J].Journal of Harbin Institute of Technology,2021,53(2):104.DOI:10.11918/202001057
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1565次   下载 1000 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于多视角图像的建筑环境信息建模方法
殷青1,2,王春兴1,2,韩昀松1,2
(1.哈尔滨工业大学 建筑学院,哈尔滨 150001;2.寒地城乡人居环境科学与技术工业和信息化部重点实验室(哈尔滨工业大学),哈尔滨 150001)
摘要:
结合实践案例,探索了融合多视角图像数据的建筑环境信息建模方法,旨在提高建筑环境信息建模效率,改善屋檐底部等建筑局部信息建模精度;探索了多视角图像数据融合技术路线,并结合实践案例,展开了低空摄影测量与地面摄影,采集了实践案例的建筑与环境图像数据;构建连接点,融合多视角图像数据,将地面图像与空中图像融合,对一些空中很难拍摄到的死角区域进行图像的补充,实现多角度、全方位的图像采集,通过空中三角测量处理、密集匹配、纹理映射,生成实践案例的建筑环境信息三维数字模型.实践结果表明:通过融合低空摄影与地面摄影图像数据,可显著提高建筑环境信息建模效率和建筑细部信息建模精度,可解决单一图像源采集信息不完整的问题,且具有低成本、高效率、易操作的技术优势.对保护建筑进行数据采集和保护的过程中,利用多视角的建筑环境信息建模方法可以快速、高效地对其三维信息进行保存和记录,实现对历史建筑多维度数据的保存与传承.
关键词:  建筑环境信息建模  数据融合  低空摄影测量  三维重建  多视角图像
DOI:10.11918/202001057
分类号:TU87
文献标识码:A
基金项目:国家自然科学基金(51708149)
Building environment information modeling based on multi-view image
YIN Qing1,2,WANG Chunxing1,2,HAN Yunsong1,2
(1.School of Architecture, Harbin Institute of Technology, Harbin 150001, China; 2. Key Laboratory of Cold Region Urban and Rural Human Settlement Environment Science and Technology (Harbin Institute of Technology), Ministry of Industry and Information Technology, Harbin 150001, China)
Abstract:
Combined with practical cases, this paper explores the modeling method of building environment information based on multi-view images, aiming to improve the efficiency of building environment information modeling and the accuracy of local information modeling of building environment such as eave bottom. The technical route of multi-view image fusion was investigated, low altitude photogrammetry and ground photography were carried out based on practical cases, and the architectural and environmental image data of the practical cases were collected. By constructing connection points and fusing multi-view image data, the ground image was fused with aerial image, and the image of some dead corner areas which are difficult to capture in the air was obtained to realize multi-angle and omni-directional image acquisition. Through the air triangulation processing, dense matching, and texture mapping, the three-dimensional digital model of the building environment information of the practical case was generated. Results show that the integration of low altitude photogrammetry and ground photography image data could significantly improve the modeling efficiency of building environment information and the modeling accuracy of building detail information, and could solve the problem of incomplete information collected by a single image source, which has the advantages of low cost, high efficiency, and easy operation. In the process of data collection and protection of preserved buildings, the proposed method can achieve the rapid and efficient preservation and recording of three-dimensional data as well as realize the preservation and inheritance of multi-dimensional data of historical buildings.
Key words:  building environment information modeling  multi-source data fusion  photogrammetry  three-dimensional reconstruction  multi-view image

友情链接LINKS