期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:周洁,李泽垚,唐益群,田万君.软黏土三维水-热-力耦合冻融模型及应用[J].哈尔滨工业大学学报,2022,54(2):117.DOI:10.11918/202011033
ZHOU Jie,LI Zeyao,TANG Yiqun,TIAN Wanjun.Three-dimensional thermal-hydraulic-mechanical coupling frost thaw model of soft clay and its application[J].Journal of Harbin Institute of Technology,2022,54(2):117.DOI:10.11918/202011033
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 760次   下载 1397 本文二维码信息
码上扫一扫!
分享到: 微信 更多
软黏土三维水-热-力耦合冻融模型及应用
周洁1,李泽垚1,2,唐益群1,田万君2
(1.同济大学 土木工程学院,上海 200092; 2.中国建筑第二工程局有限公司,北京 100074)
摘要:
人工地层冻结法是沿海地区软黏土进行地层加固的一种常见绿色工法,地下空间开挖的大型及复杂化使目前冻结法面临更加复杂的渗流环境。为此,通过分凝冻胀理论刚性冰模型的三维化推广,建立能考虑水分迁移的热-水-力耦合作用冻胀融沉模型,以模拟复杂渗流环境下的人工冻结工程。基于模型使用COMSOL有限元进行模拟,与同尺寸室内模型试验数据进行对比,验证该模型在复杂渗流环境组合地层(软黏土、粉细砂)冻结中的适用性。模拟结果表明:在组合地层条件下,渗流会削减冻结稳定时冻结帷幕的厚度;当速度大于1.2 m/d时,冻结帷幕将不能达到设计厚度;冻结帷幕靠近渗流边界的一侧冻胀力增长缓慢、冻胀力的最大值较低;渗流致使地表产生不均匀沉降,下游区域的沉降量更大。利用已验证模型对组合地层渗流作用下的冻结法施工进行模拟预测,提出结合组合地层渗流因素的隧道安全冻结法分级标准,为冻结法在沿海更复杂渗流环境下的施工安全与预警提供依据。
关键词:  组合地层渗流  人工地层冻结法  分凝冻胀  冻胀力  沉降
DOI:10.11918/202011033
分类号:TU473
文献标识码:A
基金项目:国家自然科学基金青年科学基金(41702299)
Three-dimensional thermal-hydraulic-mechanical coupling frost thaw model of soft clay and its application
ZHOU Jie1,LI Zeyao1,2,TANG Yiqun1,TIAN Wanjun2
(1.College of Civil Engineering, Tongji University, Shanghai 200092, China; 2.China Construction Second Engineering Bureau Ltd., Beijing 100074, China)
Abstract:
Artificial ground freezing is a common green construction method for strengthening the strata of soft clay in coastal areas. Due to the large-scale and complexity of underground excavation, the artificial ground freezing is faced with more complicated seepage situations. By extending the three-dimensional rigid ice model of the segregation frost heave theory, a thermal-hydraulic-mechanical coupling frost heave and thawing settlement model considering water migration was established to simulate artificial freezing under complex seepage environments. Based on the model, simulation was carried out by using COMSOL finite element, and results were compared with the experimental data of the indoor model of the same size, so as to verify the applicability of the model in the freezing of combined stratum (soft clay, silt fine sand) in complex seepage environment. Simulation results show that under combined formation conditions, seepage reduced the thickness of the freezing curtain when freezing was stable; when the speed was greater than 1.2 m/d, the freezing curtain could not reach the design thickness; the frost heave force on the side of the freezing curtain near the seepage boundary increased slowly and the maximum value was low; seepage caused uneven settlement on the ground, and the settlement in the downstream area was greater. Finally, the verified model was used to simulate and predict the construction of the freezing method under the action of combined stratum seepage, and the grading standard of the tunnel safety freezing method combining the combined stratum seepage factors was proposed to provide the basis for the construction safety and early warning of the freezing method in more complicated coastal seepage environments.
Key words:  combined stratum seepage  artificial ground freezing  segregation frost heave  frost heave force  settlement

友情链接LINKS